Most people associate surfboards with the magical sensation of gliding down the face of a wave. The fact that a surfboard will spend the majority of its life on land might not immediately occur to you. Another tip for having the best time surfing is how you take care of your surfboard when it’s not in the water. Here are some pointers for maintaining the happiness and health of your surfboard.
- Keep your board on a reliable surfboard rack so you can relax.
The surfboard won’t tip over or suffer reckless damage on a good surfboard rack. In the long term, you’ll spend less on repairs if you respect your board. You should treat your board with respect because it was probably made by hand. A quality rack is a way to honor this craftsmanship.
- keep in mind when choosing a surfboard rack
The most important element when choosing a surfboard rack is the type of board you currently own. When using a lightweight shortboard, you can even expand the rack to accommodate your entire collection. However, if your board is heavier, it’s time to pull out the big guns and get a strong rack. Stand-up paddle boards (SUPs), the sumo wrestlers of surfboards, are a prime example of this. Make sure to pick a SUP rack rather than a conventional rack when storing a SUP.
- The location of the rack is the second consideration.
Get a horizontal rack that supports the board parallel to the ground if you have a heavy board and want to have an easier time lifting it on and off the rack. Although angled racks are excellent space savers, you should also think about hanging your board from a rack in the ceiling. Garages are the ideal place for ceiling racks.
- Consider carefully where to put your surfboard racks.
The sun is one of the worst enemies of a healthy surfboard. Surfboards are made brittle by UV damage, which also taints their color. Your board will preserve the unique feel it had when it was brand-new if you keep it out of the sun’s UV rays. When you exit the ocean, give your surfboard a brief rinse because salt water rusts surfboards as well.
- Determined the perfect location
Once you’ve determined the perfect location, secure your racks to a strong base. Most frequently, this requires locating the wall stud. You won’t ever have to be concerned about your board toppling if you use caution. When the waves look good, you can get your board and go knowing it is ready to go!
- After each surf, clean your surfboard.
Salt is incredibly harmful, and even though fiberglass is a tough material, if you repeatedly let salt water and sand sit on your board, the damage will eventually occur. To ensure that your board stays as good as new for as long as possible, it’s important to rinse off all of your gear and thoroughly dry it after each surf. Saltwater can also rust and destroy your fin boxes, fin screws, and leash.
- Regularly inspect your board for damage and repair any damage
When surfing that shallow reef, it is safe to assume you have probably caused some damage if you hear a loud crunch when you land your board. The best course of action is to check your board after exiting the water.
Before and after a surf, it’s a good idea to quickly inspect your board for damage to make sure it’s watertight. You don’t want your board to feel 2 kg heavier when you get out of the water because it has absorbed a lot of water.
- Replace Your Wax
There are many folks that neglect to do this. It is simple to just keep adding wax, but if you do that, you can miss minor scratches on the board that need to be repaired. we advise removing your wax and reapplying it once or twice a year.
- Don’t Worry if Your Board Gets Damaged.
One of the reasons these boards are used by beginners is that they are forgiving, so you don’t have to worry as much about whacking these boards. They mainly consist of closed-cell foam, which means they don’t absorb water quickly. We advise using wax to repair the board so you may immediately resume surfing.
- Use the Proper Foam Board Repair Kits
Avoid using bodyboard or PU repair kits on your foam board since they can melt the inside foam and cause damage. The epoxy resin dries hard with rough edges. Little dings or holes usually don’t require repairs.
Conclusion
In order to keep your dream board looking nice and performing well for many years to come, it’s important to know how to love your surfboard after you purchase it with your hard-earned money.
No matter the style of construction, there are a few fundamental guidelines that all surfboards must follow. You may already be aware of some of these, but you’d be surprised at how few people actually follow them.
